Tag Archives: BBI-32

MIP I/O board complete!

The completed MIP I/O distribution board

Following on from my last blog post when I started working on my MIP I/O distribution board, after a couple of days at Legoland with Nikki and the children I got home last night and decided that this morning I would complete the MIP I/O board.

So the MIP I/O card now has the Leo Bodnar BBI-32 card soldered to the inputs and mounted on the reverse of the MIP I/O distribution board, as a temporary measure I’ve used some self adhesive PCB mounts.

Back of the MIP I/O board.. wires soldered on to the reverse of the BBI-32.

While I was away on Friday the USB Socket B order turned up which enabled me to solder the socket on to the dedicated Leo Bodnar BBI-32 card which worked great.

So today I had to solder all the output wires to the board and the other end of the wires I crimped with bootlace crimps the same way that I did for my temporary ECAM switch panel as these crimps work great with the OpenCockpits USBOutputs card.

MIP I/O distribution card connected to my PC and me testing and configuring the encoders inputs.

Once all was ready I connected the BBI32 up to my flight simulator PC and ran the BBI-32 configuration software to configure inputs 1 – 2 and 3 – 4 as encoders, the remaining 9 inputs will be used as standard switches so no further configuration was needed.

The BBI-32 card that is now attached to the back of the MIP I/O card is dedicated to the MIP I/O board – I don’t intend on using the other unused 19 inputs as I ideally want to keep this I/O card fully dedicated to the MIP.

I have another 2 BBI-32 cards of which I will be using for my overhead panel once I am ready to start that.

I hope everyone that went to FSWeekend had a great time, I would have absolutely love to have gone but we had already pre-booked a trip to Legoland in Windsor (London), maybe next year for me! 🙂