Tag Archives: Glaresheild

Very productive weekend… Priming, sanding and ECAM/Throttle/Engine panel

I had a very active weekend on my project this weekend, here is a quick summary of what I achieved this weekend:-

  • Primed my pedestal (that I constructed last weekend).
  • Primed my MIP frame and glare-shield casing.
  • Screwed and glued the glareshield housing together.
  • Confirmed that B&Q will mix RAL codes.
  • Designed and printed the upper centre panels for my pedestal (ECAM brightness, ECAM mode switches and LED indicators as well as Engine starter panel), mounted and soldered in all the electronics.

So a little more in-depth now then…

From my last post that I made about last weekend, I found some old emulsion paint (a creamy colour that I had previously used to decorate a room in my house) of which was surplus to requirements and perfect for priming my MDF pedestal, the reason for priming the MDF is two reasons really firstly to seal the MDF, as you may know MDF is terrible for absorbing moisture and after cutting and sanding my panels the MDF fibres are left very exposed by coating the MDF in emulsion you are sealing the MDF and will be less prone to swelling due to moisture etc. in the future the other reason is to provide a good surface to paint the final layer(s) on later 🙂

I also had a nice surprise yesterday when I came across my MIP stand components which I had previously cut out last year (I had completely forgotten I had done that :)) so on Saturday I gave my pedestal a good coat ensuring the outer/visible walls and all cut  edges had a good coat of emulsion, I left to dry overnight and then lightly sanded down with sandpaper to remove the brush strokes etc and generally give a smooth even feel and then applied a second coat and is now back in the shed… ready for next weekend along with my MIP frame of which I also primed!

The next step once all items have been primed, sanded, a second primer layer applied and sanded once more will then be to apply several layers of the final colour, as mentioned above B&Q have confirmed they can mix colours based on a RAL colour code which I am extremely happy to hear 🙂 – Weather permitting I’ll make a trip to B&Q this weekend to get the colour mixed for the pedestal and MIP frame – I have heard that prices for custom paint mix starts at £22.

Sorry to be working backward but on Saturday I concentrated on getting my upper pedestal panel complete (well started and complete) as I am using a customised Saitek Throttle I needed to incorporate that into a panel, currently the cheapest Airbus Throttle and Engine Starter panel is over £1,500 (well out of my price range when I have many more important things to sort out for now) so I decided to incorporate the ECAM panel, throttle and engine starter panel on a single panel but made to look as if it was three (photos to come). All the momentary switches, toggle switches, encoders and rotary switches are now mounted and spent many hours yesterday soldering LED’s, resistors and switches together…. all of which seem to be working OK but still need to do the final test if FSX later on.

The upper centre pedestal panels was designed by myself in Adobe Illustrator (a great vector design tool) and then printed off, laminated then then carefully cut out with a Stanley knife (I should probably use a Scalpel knife but I didn’t have one to hand) the holes for the switches and LED’s etc then marked the 3mm PVC foamex before drilling the holes…. the Foam-ex is semi ridged and gives the switches a sturdy   mounting plate. After that was ready and confirmed that the PVC holes lined up with the laminated panel holes I then used double sided tape to stick the laminated panel design to the PVC panel and then finally mounted all the switches and LED’s and the Saitek Custom Throttle.

All-in-all a VERY productive weekend… lets see what next weekend brings although on my ‘to-do’ list of which I hope to achieve is as follows:-

  • Get the side-stick stand out of the loft, get that finished – a whole needs cutting for my Logitech Attack3, sanded down, primed… ideally want to elevate the left side of the stick and provide a slanted look stick (using some precision cut and sanded MDF)
  • Apply the second coat of primer to the MIP frame panels.
  • Give a final sand to the pedestal now that it has had both of it’s primer layers applied.
  • Get some PVC Faux leather cloth ordered from eBay (during the week hopefully to have in time for the weekend)
  • Get the Airbus blue colour mixed by B&Q.
  • All going well and I do manage to get the Airbus blue paint from B&Q, I will then apply a total of three layers using a foam roller to the Pedestal and MIP stand… After leaving for a week to dry etc I will then aim to upholster the glare-shield top and pedestal rim using the Faux leather to complete the pedestal and glare-shield 🙂

Really good progress (in my opinion) so far, still loads more to do but I am looking forward to it and gives me stuff to do 🙂